[1]. http://americanhistory.si.edu/fuelcells/pem/pemmain.htm[OL]
[2] Houblod H G. Nano structure of Nafion: a SAXS study[J]. J Electrochimica Acta，2001，46：l559-1563．
[3] Zawodzinski T A Jr．Derouin C，Radziski S. et al．Water uptake by and transport through Nafion® 117 membranes[J]. J Electrochem Soc，l993，140：l041-1047．
[4] Djilali N. Lu D M. Influence of heat transfer on gas and water transport in fuel cells[J]. Intern J Thermal Sci，2002，4l: 1 29-40．
[5] Rajalakshmi N．Sridhar P．Dhathathreyan K S．Identification and characterization of parameters for external humidification used in polymer electrolyte membrane fuel cells[J]. J Power Source，2002，l09：2 452-457．
[6] Yang T H. Yoon Y G. Kim C S．et a1．A novel preparation method for a self-humidifying polymer electrolyte membrane[J].  J Power Sources，2002，106：1 328-332．
[7] Heitner W C. Recent advances in perfluorinated ionomer membranes: structure, properties and applications[J]. J Membr Sci，1996，120：1 1-33.
[8] Mauritz K A. Moore R B. State of understanding of Nafion[J]. Chem Rev，2004，104：10 4535-4585.
[9] 陈延禧. 聚合物电解质燃料电池的研究进展[J]. 电源技术，1996，20：1 21-27.
[10] 张永明. 全氟离子交换膜的研究和应用[J]. 膜科学与技术，2008，28：3 1-4.
[11] Curtin D E. Lousenberg R D. Henry T J. et al. Advanced materials for improved PEMFC performance and life[J]. J Power Sources，2004，131：1 41–48
[12] http://www2.dupont.com/FuelCells/en_US/assets/downloads/dfc201.pdf[OL]
[13] Choudhury B. Material Challenges in Proton Exchange Membrane Fuel Cells[R]. International Symposium on Material Issues in a Hydrogen Economy，Richmond，VA USA November 12 - 15, 2007.
[14] Merlo L. Ghielmi A. Cirillo L. et al. Membrane electrode assemblies based on HYFLON ion for an evolving fuel cell technology-separation science and technology[J]. Separat Sci Tecnol，2007，42：2891–2908.
[15]http://www.solvaysites.com/sites/solvayplastics/EN/specialty_polymers/Melt_Processable_Fluoropolymers/Pages/Aquivion_PFSA.aspx[OL]
[16] Merlo L. Ghielmi A. Cirillo L. et al. Resistance to peroxide degradation of Hyflon® Ion membranes[J]. J Power Sources，2007，171：1 140–147
[17] Danilczuk M. Perkowski A. J. Schlick S. Ranking the stability of perfluorinated membranes used in fuel cells to attack by hydroxyl radicals and the effect of Ce(III): a competitive kinetics approach based on spin trapping ESR[J]. Macromolecules，2010，43：7 3352-3358.
[18] Luan Y. H. Zhang Y. M. Li L. et al. Perfluorosulfonic ionomer solution in
N,N-dimethylformamide [J]. J Appl Polym Sci，2008，107：2892–2898.
[19] Luan Y. H. Zhang Y. M. Zhang H. et al. J Annealing effect of perfluorosulfonated ionomer membranes on proton conductivity and methanol permeability[J]. J Appl Polym Sci，2008，107：396–402.
[20] Luan Y. H. Zhang H. Zhang Y. M. et al. Study on structural evolution of perfluorosulfonic ionomer from concentrated DMF-based solution to membranes[J].
 J Membr Sci，2008，319：1 91–101
[21] Li Q. F. He R. H. Jensen J. Q. et al. Approaches and recent development of polymer electrolyte membranes for fuel cells operational above 100 oC[J]. Chem Mater，2003，15：4896-4915
[22] Li Q. F. He R. H. Gao J. A. et al．CO poisoning effect in polymer electrolyte membrane fuel cells, operational at temperatures up to 200 oC[J]. J Electrochem Soc，2003，150：12 A1599-A1605.
[23] Jefrey K. Bamdad B. Alex, H. et al. Ultra-thin integral composite membrane[P]. US Patent 5,547,551，1996.
[24] Cleghorn S. Kolde J. Liu W. Catalyst coated composite membranes[M]. Handbook of Fuel Cells – Fundamentals, Technology and Applications, John Wiley & Sons, Ltd. Ed. Vielstich W. Gasteiger H. A. Arnold Lamm.: Fuel Cell Technology and Applications. 2003，3：Ch 44 566-575.
[25] Liu W. Ruth K. Rusch G. The Membrane Durability in PEM Fuel Cells[J]. J. New Mat. Electrochem. Systems，2001，4：227-231.
[26] Tooru K. Tatsuo Y. Development of PRIMEA for DMFC[J].  FCDIC Fuel Cell Symposium Proceedings，2005，12：228-231.
[27] Hamrock S. New Membranes for PEM Fuel Cells. http://www1.eere.energy.gov/hydrogenandfuelcells//pdfs/htmwg05_hamrock.pdf[OL]. [28] Zhang J. L. Xie Z. Zhang J.J. et al. High temperature PEM fuel cells[J]. J Power Sources，2006，160：2 872–891.
[29] Bose S. Kuila T. Nguyen T. X. Kim N. H. et al. Polymer membranes for high temperature proton exchange membrane fuel cell: Recent advances and challenges[J]. Prog Polym Sci，2011，36：6 813-843. 
[30] Ma C. Zhang L. Mukerjee S. D.et al. An investigation of proton conduction in select PEM’s and reaction layer interfaces-designed for elevated temperature operation[J]. J. Membr. Sci，2003，219：1 123–136.
[31] Yen C.Y. Lee C.H. Lin Y. F. et al. Sol–gel derived sulfonated-silica/Nafion_ composite membrane for direct methanol fuel cell[J]. J Power Sources，2007，173：1 36–44.
[32]Rhee C. H. Kim H. K. Chang H. et al. Nafion/sulfonated montmorillonite composite: A new concept electrolyte membrane for direct methanol fuel cells[J]. Chem Mater，2005，17：1691–1697. 
[33] Wu Z. Sun G. Jin W. et al. A model for methanol transport through Nafion-membrane in diffusion cell[J]. J Membr Sci，2008，325：1 376–382.
[34] Miyake N. Wainright J. S. Savinell R.F. Evaluation of a sol–gel derived Nafion/silica hybrid membrane for polymer electrolyte membrane fuel cell applications: II. Methanol uptake and methanol permeability[J]. J Electrochem Soc 2001，148：A905–A909.
[35] Hsu W. Y. Gierke T. D. Ion transport and clustering in nafion perfluorinated membranes[J]. J Membr Sci，1983，13：3 307-326.
[36] Rieke P. C. Vanderborgh N. E. Polymer electrolyte fuel cell model[J]. J Membr Sci，1987，32：2 313-328．
[37] Ramani V. Kunz H.R. Fenton J. M. Metal dioxide supported heteropolyacid/Nafion® composite membranes for elevated temperature/low relative humidity PEFC operation[J]. J Membr Sci，2006，279：1 506-512．
[38]http://www1.eere.energy.gov/hydrogenandfuelcells/pdfs/technical_targets_membr_auto.pdf[OL]
[39] Adjemian K.T. Lee S.J. Srinivasan S. J. et al. Silicon oxide Nafion composite membranes for proton-exchange membrane fuel cell operation at 80-140°C[J]. J. Electrochem.Soc. 2002，149：A256–A261.
[40] Savinell R. Yeager E. Tryk D. et al. A polymer electrolyte for operation at temperatures up to 200°C[J]. J. Electrochem. Soc，1994，141：L46-L48.
[41] Shao Z.G. Xu H. Li M. et al. Hybrid Nafion–inorganic oxides membrane doped with heteropolyacids for high temperature operation of proton exchange membrane fuel cell[J]. Solid State Ionics，2006，177：7 779–785.
[42] Yang C. Srinivasan S. Bocarsly A.B. et al. A comparison of physical properties and fuel cell performance of Nafion and zirconium phosphate/Nafion composite membranes[J]. J. Membr Sci，2004，237：1 145–161.
[43] Kwak S.H. Yang T.H. Kim C.S. et al. Polymer composite membrane incorporated with a hygroscopic material for high-temperature PEMFC[J].  Electrochim Acta，2004，50：2 653–657.
[44] Kwak S.H. Yang T.H. Kim C.S. et al. Nafion/mordenite hybrid membrane for high-temperature operation of polymer electrolyte membrane fuel cell[J].  Solid State Ionics，2003，160：3 309–315.
[45] Lin J. C. Jnuz H. R. Fenton J. M. In Handbook of Fuel Cells; Vielstich, W., Lamm A. Gasteiger H. A. Eds. John Wiley & Sons Ltd.: New York 2003，3：457.
[46] Si Y. Kunz H.R. Fenton J.M. Nafion-Teflon-Zr(HPO4)2 composite membranes for high-temperature PEMFCs[J]. J Electrochem Soc，2004，151：A623–A631
[47] Zhai Y. F. Zhang H. M. Hu J. W. et al. Preparation and characterization of sulfated zirconia (SO42−/ZrO2)/Nafion composite membranes for PEMFC operation at high temperature/low humidity[J]. J Membr Sci，2006，280：1 148–155
[48] Park Y. I. Kim J.D. Nagai M. Increase of proton conductivity in amorphous phosphate-Nafion membranes[J]. J Mater Sci Lett，2000，19：18 1621-1623.
[49] Dimitrova P. Friedrich K. A. Stimming U. et al. Modified Nafion®-based membranes for use in direct methanol fuel cells[J]. Solid State Ionics，2002，150： 115-122.
[50] Noto V. D. Piga M. Lavina S. et al. Structure, properties and proton conductivity of Nafion/[(TiO2) (WO3)0.148]ψTiO2 nanocomposite membranes[J]. Electrochim Acta，2010，55：4 1431–1444.
[51] Tian J. Gao P. Zhang Z. et al. Preparation and performance evaluation of a Nafion-TiO2 composite membrane for PEMFCs[J]. Int J hydrogen energ，2008，33：20 5686–5690
[52]Lin Y. F. Yen C. Y. Hung C.H. et al. A novel composite membranes based on sulfonated montmorillonite modified Nafion® for DMFCs[J]. J Power Sources，2007，168：1 162–166.
[53] Chen L. C. Yu T. L. Lin H. L. et al. Nafion/PTFE and zirconium phosphate modified Nafion/PTFE composite membranes for direct methanol fuel cells[J]. J Membr Sci，2008，307：1 10–20.
[54] Wang H. Holmberg B.A. Huang L. et al. Nafion-bifunctional silica composite proton conductive membranes[J]. J. Mater. Chem，2002，12：4 834–837.
[55] Tazi B. Savadogo O. Parameters of PEM fuel-cells based on new membranes fabricated from Nafion®, silicotungstic acid and thiophene[J]. Electrochim Acta，2000，45：25 4329-4339
[56] Mioc U. Davidovic M. Tjapkin N. et al. Equilibrium of the protonic species in hydrates of some heteropolyacids at elevated temperatures[J]. Solid State Ion，1991，46：1 103-109.
[57] Shang F. J. Li L. Zhang Y. M. PWA/silica/PFSA composite membrane for direct methanol fuel cells[J]. J Mater Sci，2009，44：4383–4388
[58] Su L.J. Pei S. P. Li L. et al. Preparation of polysiloxane/perfluorosulfonic acid nanocomposite membranes in supercritical carbon dioxide system for direct methanol fuel cell[J].  Int J hydrogen energ，2009，34：16 6892 – 6901
[59] Su L.J. Li L. Li H. et al. Preparation of polysiloxane modified perfluorosulfonic acid composite membranes assisted by supercritical carbon dioxide for direct methanol fuel cell[J]. J Power Sources，2009，194：1 220–225.
[60] 吴千舜. 诸柏仁. 燃料电池质子交换膜的最新发展[J]. Chemistry，2004，62： 1 123-138.
[61] Su L.J. Li L. Li H. et al. Perfluorosulfonic acid membranes treated by supercritical carbon dioxide method for direct methanol fuel cell application[J]. J Membr Sci，2009，335：1 118–125.