Position：Home >> Abstract

Preparation and gas separation performances of low temperature pyrolytic carbon membranes
Authors： DONG Junying1, LI Lin1,CHEN Anliang1,CAO Yue1, WANG Hong2，WANG Tonghua1*,LI Jianxin2, ,CAO Yiming3
Units： 1.State Key Laboratory of Fine Chemicals, Carbon Research Laboratory, R&D Center of Membrane Science, School of Chemical Engineering, Dalian University of Technology, Dalian 116023, China
KeyWords： polyimide; low temperature pyrolysis; structure; gas separation
ClassificationCode：TQ028.8
year,volume(issue):pagination： 2012, 32(3):22-27

Abstract：

Low temperature pyrolytic membranes were prepared from Kapton-Type Polyimide. TG-MS, FTIR, EA, XRD and gas permeability were used to character the change of chemical structure and microstructure, the gas separation performance during the low temperature pyrolysis at different temperatures and atmosphere. Results show that pyrolytic temperature and atmosphere have a great impact on chemical and carbon structure and the gas separation performance of low temperature carbon membrane. There is no evident variation of gas permeability before 450℃ and the gradual enlargement in gas permeability and decrease in gas selectivity with the increase of temperature after 450℃. The carbon membranes prepared in air have a larger gas permeability and lower  selectivity than those prepared in nitrogen.

Funds：
国家自然科学基金面上与重点项目(20776024,20976021,20836006), 国家863项目2009AA03Z215，天津工业大学中空纤维膜材料与膜过程省部共建国家重点实验室培育基地开放基金

AuthorIntro：
董军营(1984-)，男，山东人，硕士生，从事炭材料及膜材料的研究

Reference：

[1] 邱英华，王同华，宋成文.热解氛围对聚丙烯腈分离炭膜微结构的影响.[J].新型炭材料, 2006,2:161-166
[2] Kusuki Y, Shimazaki H, Tanihara N, et al. Gas permeation properties and characterization of asymmetric carbon membranes prepared by pyrolyzing asymmetric polyimide hollow fiber membrane.[J].J.Membr.Sci., 1997, 134 (2):245–253.
[3] Centeno TA, Vilas J L, Fuertes A B. Effects of phenolic resin pyrolysis conditions on carbon membrane performance for gas separation.[J].J.Membr.Sci, 2004,228 :45–54
[4] Choe C R，Lee H K. Effect of processing parameters on the mechanical properties of carbonized phenolic resin.[J].Carbon，1992,30:247-249.
[5] Bruck S D. Thermal degradation of an aromatic polypyromellitimide in air and vacuum I — Rates and activation energies.[J].Polymer,1964,5:435
[6]Crossland T B, Knight G J, Wright W W. Thermal degradation of some polyimides.[J].British polymer Journal, 1987,19(3-4):291-301.
 [7] Bos A., Punt I G M, Wessling M, et al. Suppression of CO2-plasticization by semi interpenetrating polymer network formation.[J].J. Polym. Sci. B Polym. Phys., 1998，36 (9): 1547–1556.
[8] Barsema J N, Klijnstra S D , Balster J H,et al. Intermediate polymer to carbon gas separation membranes based on Matrimid PI. [J].J. Membr.Sci., 2004, 238 (1-2):93-102.
[9]Shao L, Chung T S, Pramoda K P. The evolution of physicochemical and transport properties of 6FDA-durene toward carbon membranes; from polymer, intermediate to carbon.[J].Micro. Mesopor. Mater., 2005, 84 (1-3):59-68.
[10]Tin P S, Xiao Y C, Chung T S. Polyimide-carbonized membranes for gas separation: Structural, composition, and morphological control of precursors.[J].Separation & Purification Reviews, 2007, 35:285–318.
[11]王同华，呼立红，刘庆岭等. 预氧化处理对聚醚酰亚胺基炭膜结构与气体分离性能的影响.[J]. 新型炭材料, 2008,23:264-258.

Service：
【Download】【Collect】

《膜科学与技术》编辑部 Address: Bluestar building, 19 east beisanhuan road, chaoyang district, Beijing; 100029 Postal code; Telephone：010-80492417/010-80485372; Fax：010-80485372 ; Email：mkxyjs@163.com

京公网安备11011302000819号