| Preparation of hybrid membrane and its performance for uptaking Lithium |
| Authors: XIE Lixin1,2 , CHEN Xiaomian1,2 |
| Units: 1. Chemical Engineering Research Center, School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, PR China; 2. Tianjin Key Laboratory of Membrane Science and Desalination Technology, Tianjin University, Tianjin 300072, PR China |
| KeyWords: Li1.6Mn1.6O4; PVC; hybrid membrane; lithium uptake |
| ClassificationCode:TQ028.8 |
| year,volume(issue):pagination: 2013, 33(3):103-107 |
|
Abstract: |
|
Spinel-type manganese oxide (SMO) Li1.6Mn1.6O4 was mixed with PVC, and then a new type of flat membrane was successfully prepared for recovering lithium from lithium-containing waters by a solvent exchange method. After the hybrid membrane was treated with an HCl solution, the membrane can uptake lithium, a series of experiments were given. As results showed, after the membrane was treated with an HCl solution it showed a good performance in adsorption capacity with a maximum adsorption of 29 mg•g-1 in six hours. When the adsorbed lithium was eluted by 0.5 M HCl, the lithium extraction reached the balance and about 95% lithium was extracted, and the rate of manganese dissolution is 3.5 %. The membrane showed good selectivity for Li+ in the competitive adsorption with Na+、K+、Mg2+、Ca2+. Repeated experiments showed that this new membrane had a good stability. |
|
Funds: |
|
AuthorIntro: |
|
Reference: |
|
[1] Grady H R. Lithium metal for the battery industry [J]. Journal of Power Sources, 1980, 5(1):127-135. |
|
Service: |
| 【Download】【Collect】 |
《膜科学与技术》编辑部 Address: Bluestar building, 19 east beisanhuan road, chaoyang district, Beijing; 100029 Postal code; Telephone:010-80492417/010-80485372; Fax:010-80485372 ; Email:mkxyjs@163.com
京公网安备11011302000819号