Position：Home >> Abstract

Preparation of poly (amide-12-b-ethylene oxide) membrane and their performance
Authors： FENG Shichao, REN Jizhong*, LI Hui, HUA Kaisheng, DENG Maicun
Units： National Engineering Research Center of Membrane Technology,Dalian Institute of Chemical Physics,Dalian 116023,China
KeyWords： CO2 recovery;dense membrane;Pebax1074
ClassificationCode：TQ028.8
year,volume(issue):pagination： 2013, 33(4):53-58

Abstract：

Block copolymer poly (amide-12-b-ethylene oxide) (Pebax1074) is used to prepare the hydrophilic dense membrane by casting method. Due to the specific affinity of PEO segment to polar gas CO2, Pebax1074 membrane shows high CO2 permeability and CO2/light gas selectivity. Due to CO2 induced plasticization effect, the CO2 permeability increases with increasing pressure, which is more obvious at low temperature. But the permeabilities of N2、CH4 and H2 decrease with increasing pressure due to the hydrostatic pressure effect, which decreases with increasing temperature.. The relationship between gas permeability and operating temperature can be described by Arrhenius equation. With increasing pressure, the activation energies of permeation for N2、CH4 and H2 decrease, but that for CO2 increases. 

Funds：
863项目（2012AA03A611）和国家科技支撑计划（2011BAC08B00）

AuthorIntro：
冯世超（1984-），女，河北邯郸人，博士，从事膜分离过程研究

Reference：

[1] Merkel T C, Lin H, Wei X, Baker R. Power plant post-combustion carbon dioxide capture: An opportunity for membranes [J]. J Membr Sci, 2010, 359:126–139
[2] 杨爱军,张丽红,孙丽萍,程 俊.膜技术在天然气分离中的应用,辽宁化工,2008,37(4):245-248
[3] Brunetti A, Scura F, Barbieri G, Drioli E, Membrane technologies for CO2 separation, J Membr Sci, 2010, 359:115–125.
[4] Lin H, Freeman B D, Materials selection guidelines for membranes that remove CO2 from gas mixtures, J Mol Struct, 2005, 739:57–74.
[5] Lin H, Freeman B D. Gas solubility, diffusivity and permeability in poly(ethylene oxide) [J]. J Membr Sci, 2004, 239:105–117.
[6] Blume I, Pinnau I. Composite membrane, method of preparation and use [P]. US Pat: 4963165, 1990-10-16.
[7] Bondar V I, Freeman B D, Pinnau I. Gas transport properties of poly (ether-b-amide) segment block copolymers [J]. J Polym Sci, B: Polym Phys, 2000,38:2051-2062
[8] Liu L, Chakma A, Feng X. Preparation of hollow fiber poly(ether block amide)/polysulfone composite membranes for separation of carbon dioxide from nitrogen [J]. Chem Eng J, 2004, 105:43-51.
[9] Kim J H, Ha S Y, Lee Y M. Gas permeation of poly (amide-6-b-ethylene oxide) copolymer [J]. J Membr Sci, 2001, 190:179-193.
[10] Car A, Stropnik C, Yave W, Peinemann K V, PEG modi?ed poly (amide-b-ethylene oxide) membranes for CO2 separation, J Membr Sci, 2008, 307:88–95.
[11] Yave W, Car A, Funari S S, Nunes S P, Peinemann K V. CO2-Philic Polymer Membrane with Extremely High Separation Performance[J]. Macromolecules, 2010,43:326-333.
[12] Reijerkerka S R., Knoef M H., Nijmeijer K, et al. Poly(ethylene glycol) and poly(dimethyl siloxane): Combining their advantages into efficient CO2 gas separation membranes[J]. J Membr Sci, 2010, 352:126-135.

Service：
【Download】【Collect】

《膜科学与技术》编辑部 Address: Bluestar building, 19 east beisanhuan road, chaoyang district, Beijing; 100029 Postal code; Telephone：010-80492417/010-80485372; Fax：010-80485372 ; Email：mkxyjs@163.com

京公网安备11011302000819号