Position：Home >> Abstract

The influence of drawing process on the properties of PPHF
Authors： HUANGFU Fengyun1,2,DAI Peng2, KONG Yuanyuan1, BAI Yundong1, LI Haiming2
Units： 1.Tianjin Polytechnic University for the textile auxiliaries co.,LTD, Tianjin 300160,China 2.Institute of environmental and chemical engineering,Tianjin Polytechnic University, State Key Laboratory of Hollow Fiber Membrane Materials and Processes, Tianjin 300160,China
KeyWords： polypropylene; hollow fibers membrane; melt-stretch method; drawing process
ClassificationCode：TQ028.8
year,volume(issue):pagination： 2014, 34(3):43-47

Abstract：

In this thesis polypropylene hollow fibers (PPHF) membrane are prepared by using melt-stretch method. Different performance of hollow fiber membrane are made by changing draw ratio and draw rate, and they are tested and characterized from the macro and micro level. The results showed that with the increase of draw ratio, water flux, gas flux and average pore diameter are increase firstly and then decrease. And the porosity is increased firstly and remain unchanged subsequently. With the increase of draw rate, The elastic recovery rate of membrane is increased firstly and remain unchanged then. And the porosity and gas flux of membrane are increase firstly and decrease subsequently then increase again. The SEM photos confirm this changes.

Funds：

AuthorIntro：
皇甫风云（1956-），男，天津市人，研究员，从事反应性膜材料的研究

Reference：

[1]Kamada K, Minami S, Toshida K. Porous Polypropylene hollow filaments and method
making the same [P].US:Patent No.4055696
.1977.
[2]Kim J.J, Jang T.S,K won YDD. Structure study of microporous polypropylene hollow fiber membranes made by the melt-spinning and cold-stretching method，[J].Membrane Sci.，1994，93，209-215
[3]陈颖.聚丙烯中空纤维微孔膜的研究与进展[J] ,膜科学与技术,2001.1 :17～22
[4]Bierenbaum HS,Penoyer J A,Zimmerman D．Simultaneous stretching of multiple plies of polymeric film[P].US：No.3679538，1972．
[5]镰田键资，南俊辅，吉田完尔，多孔质中空丝的制造方法.。日本国特许厅，特许公报，昭56-52123，1981.
[6]史观一．聚丙烯制备中空纤维微孔膜的研究[C].1987年自然科学年鉴．上海：上海翻译出版公司，1987，248．
[7]王卫平，陈稀，郭礼和.β晶聚丙烯纤维冷拉伸形成微孔的研究[J]中国纺织大学学报，1991，17(3)：31～37．
[8]徐又一,杜强国,王树源等. 硬弹性聚丙烯晶相和非晶相分子链取向的研究[J]. Acta Polymerica Sinica,1993,(1): 75-79.
[9]黄征青.聚丙烯中空纤维膜亲水化的研究[J] ,膜科学与技术,2000.6 :35~41
[10]Mai K C,Wang K,Han Z W,etal.Study on the thermal stability of heterogeneous nucleation effect of polypropylene nucleated by different nucleating agents. J Appl Polym Sci.2002,83(8):1643~1650
[11]侯文贵;李凭力;张翠兰;王世昌.热致相分离制备聚丙烯微孔膜微观结构的研究.[J].膜科学与技术,2003.4:12~16
[12]陈颖;李雪梅;李晓明.聚丙烯中空纤维膜拉伸性能测试方法的试验研究[J].膜科学与技术,2010.8:22~24
[13]Lotz B,Stocker W,Schumacher M,etal.
Epitaxial crystallization and AFM investiga-
tion of a frustrated polymer structure.Macr-
omolecules,1998,31（3）:807~814

Service：
【Download】【Collect】

《膜科学与技术》编辑部 Address: Bluestar building, 19 east beisanhuan road, chaoyang district, Beijing; 100029 Postal code; Telephone：010-80492417/010-80485372; Fax：010-80485372 ; Email：mkxyjs@163.com

京公网安备11011302000819号