Membrane Science and Technology

Position：Home >> Abstract

Preparation of poly(lactic acid)membrane via complex
phase separations based on water-solubility diluent

Authors： YANG Shangang, YE Hui, ZHANG Yuzhong*,ZHAO Lizhi, SHAN Timei, LI Hong

Units： School of Material Science and Engineering, Tianjin Polytechnic University Tianjin 300387；State Key laboratory of Hollow Fiber membrane Materails and Membrane Process, Tianjin Polytechnic University, Tianjin300387,China

KeyWords： Poly(lactic acid) membrane ;complex phase separation; biodegradable; water-solubility diluent;

ClassificationCode：TQ028.8

year,volume(issue):pagination： 2014, 34(6):28-34

Abstract：

In this paper, based on water-solubility diluent (DMSO), biodegradable poly (lactic acid) membrane was prepared via complex phase separation. The effect of coagulation bath temperature, casting solution temperature as important factors on structure and performance of membrane were investigated. The results showed that when coagulation bath temperature was near to cloud point temperature, the effect of NIPs was dominating. The prepared membranes possess the structure of fingerlike pores and macrovoids with low flux and high the retentions of BSA. When coagulation bath temperature was lower than cloud point temperature, complex phase separation occurred in the phase separation process. The prepared membranes possess the structure of fingerlike pores and interconnected bicontinuous structure with high water flux and lower the retentions of BSA. The retentions of BSA was above 66% .When casting solution temperature was near to cloud point temperature, complex phase separation occurred in the phase separation process. The prepared membranes possess porous skin layer, good connectivity between membrane pores and support layer. With the increase of casting solution temperature, the membrane pore size decreased and the water flux decreased sharply from 610 L/（h•m2）to 27.6 L/（h•m2）. The retentions of BSA increased from 61%to 84%.

Funds：

国家自然科学基金项目（50973083；51373120；51173132；21204064）；天津市应用基础及前沿技术研究计划重点项目(11JCZDJC21200);

AuthorIntro：

杨山港（1987—），男，天津市宝坻人，在读硕士研究生，师从张玉忠教授，主要从事聚乳酸分离膜的制备研究；

Reference：

[1]Abed M R, Kumbharkar S C, Groth A M, et al. Ultrafiltration PVDF hollow fibre membranes with interconnected bicontinuous structures produced via a single-step phase inversion technique[J]. Journal of Membrane Science, 2012, 407: 145-154.
[2]Peng J, Su Y, Chen W, et al. Effects of coagulation bath temperature on the separation performance and antifouling property of poly (ether sulfone) ultrafiltration membranes[J]. Industrial & Engineering Chemistry Research, 2010, 49(10): 4858-4864.
[3]Yen C, He H, Lee L J, et al. Synthesis and characterization of nanoporous polycaprolactone membranes via thermally-and nonsolvent-induced phase separations for biomedical device application[J]. Journal of Membrane Science, 2009, 343(1): 180-188.
[4]Liu M, Wei Y M, Xu Z L, et al. Preparation and characterization of polyethersulfone microporous membrane via thermally induced phase separation with low critical solution temperature system[J]. Journal of Membrane Science, 2013，437：169-178
[5]逯志平, 吕晓龙, 武春瑞, 等. 低温热致相分离法制备聚偏氟乙烯中空纤维多孔膜的研究[J]. 膜科学与技术, 2012, 32(1): 12-17.
[6]Cha B J, Yang J M. Preparation of poly (vinylidene fluoride) hollow fiber membranes for microfiltration using modified TIPS process[J]. Journal of membrane science, 2007, 291(1): 191-198.
[7]Matsuyama H, Takida Y, Maki T, et al. Preparation of porous membrane by combined use of thermally induced phase separation and immersion precipitation[J]. Polymer, 2002, 43(19): 5243-5248.
[8]Moriya A, Maruyama T, Ohmukai Y, et al. Preparation of poly (lactic acid) hollow fiber membranes via phase separation methods[J]. Journal of Membrane Science, 2009, 342(1): 307-312.
[9]Tanaka T, Nishimoto T, Tsukamoto K, et al. Formation of depth filter microfiltration membranes of poly (l-lactic acid) via phase separation[J]. Journal of Membrane Science, 2012, 396: 101-109.
[10]Gross R A, Kalra B. Biodegradable polymers for the environment[J]. Science, 2002, 297(5582): 803-807.
[11]杨斌.绿色塑料聚乳酸[M].北京:化学工业出版社,2007.1-18
[12]Tanaka T, Lloyd D R. Formation of poly (L-lactic acid) microfiltration membranes via thermally induced phase separation[J]. Journal of membrane science, 2004, 238(1): 65-73.
[13]T.Tanaka, D.R.Lloyd. Formation of poly(l-lactic acid)microfiltration membranes via thermallyinduced phase Separation with Drying.[J].Jouranal of Chemical Engineering of Japan,2011,44(7),465-475.
[14]刘瑞来, 康晓燕, 刘俊劭. 水蒸气辅助法构筑图案化蜂窝状多孔膜[J]. 德州学院学报, 2012, 28(2): 53-62.
[15]王歆, 涂松, 陈元维, 等. 聚乳酸非对称膜的制备及其成骨细胞亲和性[J]. 功能材料, 2011, 42(5): 775-777.
[16]高爱林, 刘富, 薛立新. 生物基聚乳酸微孔膜的制备及透析性能[J]. 膜科学与技术, 2013, 33(4): 28-34.
[17]Chakrabarty B, Ghoshal A K, Purkait M K. Effect of molecular weight of PEG on membrane morphology and transport properties[J]. Journal of Membrane Science, 2008, 309(1): 209-221.

Service：

【Download】【Collect】

《膜科学与技术》编辑部 Address: Bluestar building, 19 east beisanhuan road, chaoyang district, Beijing; 100029 Postal code; Telephone：010-80492417/010-80485372; Fax：010-80485372 ; Email：mkxyjs@163.com