Membrane Science and Technology

Position：Home >> Abstract

Antifouling improvement of composite ultrafiltration membranes based on electrospinning technology using TiO2 as additive

Authors： LI Hongchun1, WANG Jiaona2, LI Congju1*

Units：（1．College of Material Science and Engineering, Beijing Institute of Fashion Technology, Beijing 100029 ；2. Beijing Key Laboratory of Clothing Materials R＆D and Assessment, Beijing 100029 )

KeyWords： Electrospinning; ultrafiltration ; coatings ;antifouling ;TiO2

ClassificationCode：TQ028.8

year,volume(issue):pagination： 2015, 35(2):30-35

Abstract：

Membrane fouling is one of the most important challenges faced in ultrafiltration (UF) operations . In this study , a three layers composite ultrafiltration membrane contains titanium dioxide(TiO2) was prepared by electrostatic spinning technology . Hydrophilic nano TiO2 was added in PVA by doping technology . Finally through the mixed solvent for processing , the high flux , high rejection ratio composite electrospinning ultrafiltration membrane with good antifouling property was made .

Funds：

北京市属高校创新能力提升计划项目（no. TJSHG201310012021）；国家自然科学基金项目(grant no. 21274006)；国家973项目(grant no. 2010CB933501)；北京市优秀人才培养资助（编号：2013D005001000003），北京服装学院科学研究青年创新基金（2014AL-21）, 北京服装学院创新团队与优秀人才选拔与培养计划项目。

AuthorIntro：

李洪春（1987-），男，山东潍坊人，硕士研究生，从事静电纺丝纳米纤维超/微滤膜方面研究，

Reference：

[1] Baker R W. Overview of membrane science and technology[J]. Membrane Technology and Applications, Second Edition, 2004: 1-14.
[2] Iritani E. A Review on Modeling of Pore-Blocking Behaviors of Membranes During Pressurized Membrane Filtration[J]. Drying Technology, 2013, 31(2): 146-162.
[3] Kimura K, Maeda T, Yamamura H, et al. Irreversible membrane fouling in microfiltration membranes filtering coagulated surface water[J]. Journal of Membrane Science, 2008, 320(1): 356-362.
[4] Brant J A, Childress A E. Colloidal adhesion to hydrophilic membrane surfaces[J]. Journal of membrane science, 2004,241(2): 235-248.
[5] Meng H, Cheng Q, Li C. Polyacrylonitrile-based zwitterionic ultrafiltration membrane with improved anti-protein-fouling capacity[J]. Applied Surface Science, 2014, 303: 399-405.
[6] Rahimpour A, Madaeni S S. Polyethersulfone (PES)/cellulose acetate phthalate (CAP) blend ultrafiltration membranes: preparation, morphology, performance and antifouling properties[J]. Journal of Membrane Science, 2007, 305(1): 299-312.
[7] Ju H, McCloskey B D, Sagle A C, et al. Crosslinked poly (ethylene oxide) fouling resistant coating materials for oil/water separation[J]. Journal of Membrane Science, 2008, 307(2): 260-267.
[8] McVerry B T, Temple J A T, Huang X, et al. Fabrication of Low-Fouling Ultrafiltration Membranes Using a Hydrophilic, Self-Doping Polyaniline Additive[J]. Chemistry of Materials, 2013, 25(18): 3597-3602.
[9] Taniguchi M, Belfort G. Low protein fouling synthetic membranes by UV-assisted surface grafting modification: varying monomer type[J]. Journal of membrane science, 2004, 231(1): 147-157.
[10] Reddy A V R, Mohan D J, Bhattacharya A, et al. Surface modification of ultrafiltration membranes by preadsorption of a negatively charged polymer: I. Permeation of water soluble polymers and inorganic salt solutions and fouling resistance properties[J]. Journal of Membrane Science, 2003, 214(2): 211-221.
[11] Chen H, Belfort G. Surface modification of poly (ether sulfone) ultrafiltration membranes by low‐temperature plasma‐induced graft polymerization[J]. Journal of Applied Polymer Science, 1999, 72(13): 1699-1711.
[12] 祝振鑫. 膜材料的亲水性, 膜表面对水的湿润性和水接触角的关系[J]. 膜科学与技术, 2014, 34(2): 1-4.

Service：

【Download】【Collect】

《膜科学与技术》编辑部 Address: Bluestar building, 19 east beisanhuan road, chaoyang district, Beijing; 100029 Postal code; Telephone：010-80492417/010-80485372; Fax：010-80485372 ; Email：mkxyjs@163.com