Membrane Science and Technology

Position：Home >> Abstract

Immersed tubular MBR and its membrane process

Authors： ZHU Chunping, ZHANG Chunfang, BAI Yunxiang, SUN Yuping, Gu Jin

Units： The Key Laboratory of Food Colloids and Biotechnology, Ministry of Education, School of Chemical and Materials Engineering, Jiangnan University, Wuxi 214122

KeyWords： tubular MBR; pollution resistance; module structure; boundary layer

ClassificationCode：TQ 028.8

year,volume(issue):pagination： 2015, 35(5):24-29

Abstract：

From the view of fluid mechanics, the characteristics of tubular MBR membrane filtration process were studied. Results showed that the cylindrical shape characteristics of the single tube membrane caused the change of the boundary layer and enhanced the turbulence compared to the general flat membrane surface, it is more conductive to curb the formation of pollution layer on the membrane surface. The mutual interference effect of boundary layer between membrane tubes in the module changed the form of the boundary layer of the single tube membrane, intensified the disturbance, effectively reduced the pollution layer formation. Tubular MBR of triangular staggered structure due to its neat geometric shapes can achieve good hydraulic characteristics and high membrane flux, the isosceles staggered structure is next, in-line structure is relatively weak; appropriately increasing aeration strength can enhance the interaction of the gas-liquid mixed flow between the membrane tubes.

Funds：

江苏省产学研前瞻性联合研究项目（BY2013015-06）和（BY2013015-28）资助；

AuthorIntro：

朱春瓶（1990-），女，硕士，主要研究方向，膜分离

Reference：

[1]P.Le-Clecha, B.Jeffersonb, S.J.Juddb. A comparison of submerged and sidestream tubular membrane bioreactor configurations[J]. Desalination ,2005, 173(2): 113-122.
[2]王学松，郑领英. 膜技术第二版[M]. 北京:化学工业出版社，2013: 46-47.
[3]Hongbo Liu, Changzhu Yang, Wenhong Pu, et al. Formation mechanism and structure of dynamic membrane bioreactor[J]. Chemical Engineering Journal, 2009, 148(2-3): 290-295.
[4]Kaisong Zhang, Peng Wei, Meng Yao, et al. Effect of the bubbling regimes on the performance and energy cost of flat sheet MBRs[J]. Desalination, 2011, 283: 221-226.
[5]藏莉莉，祝超伟，王盼.溶剂对水处理用PVDF微孔膜结构性能影响[J]. 水处理技术, 2012, 38(4): 68-71.
[6]Hwang B K, Lee W N, Yeon K M, et al. Correlating TMP increases with microbial characteristics in the bio-cake on the membrane surface in a membrane bioreactor [J]. Environmental Science and Technology, 2008, 42(11): 3963-3968.
[7]Yousef Rahimi, Ali Torabian, Naser Mehrdadi, et al. Optimizing aeration rates for minimizing membrane fouling and its effect in sludge characteristics in a moving bed membrane bioreactor[J]. Journl of Hazardous Materials, 2011, 186(2-3): 1097-1102.
[8]LijunXia, Adrian Wing-Keung Lawa,Anthony G. Fane Hydrodynamic effects of air sparging on hollow fiber membrane in a bubble column reactor[J].Water Research, 2013, 47(11), 3762-3772.
[9]Etienne Braak,Marion Alliet,Sylvie Schetrite, et al. Aeration and hydrodynamics in submerged membrane bioreactors[J]. Journal of Mebrane Science, 2011, 379(1-2): 1-18.
[10]Martinelli L, Guigui C, Line A. Characterisation of hydrodynamics induced by air injection related to membrane fouling behaviour[J]. Desalination, 2010, 250(2): 587-591.
[11]Fazzolari A, Gauger N R, Brezillon J. Efficient aerodynamic shape optimization in MDO context[J]. Journal of Computationl and Applied Mathematics, 2007, 20(3): 548-560.
[12]张玉洁，李小利，赵继红.动态膜生物反应器（DMBR）研究进展[J]. 膜科学与技术, 2012, (3): 117-123.

Service：

【Download】【Collect】

《膜科学与技术》编辑部 Address: Bluestar building, 19 east beisanhuan road, chaoyang district, Beijing; 100029 Postal code; Telephone：010-80492417/010-80485372; Fax：010-80485372 ; Email：mkxyjs@163.com