Position：Home >> Abstract

Study on the Effect of sintering agent on the property of Alumina Ceramic Support
Authors： TONG Zhi，LI Ying, HU Mindun，HUO Lele，LI Haihong，WANG Dan
Units： School of Environmental and Chemical Engineering, xi’an Polytechnic University, xi’an 710048,China
KeyWords： alumina ceramics； sintering agent； single tube support
ClassificationCode：X781.5
year,volume(issue):pagination： 2015, 35(5):42-46

Abstract：

Single tube α-Al2O3 ceramic support with α-Al2O3 as aggregate and CuO-TiO2 and Cu2O-TiO2 as sintering agent respectively was prepared by flow-forming and solid sintering .The effect of sintering agent on the property of the sintering temperature， the composition of the crystal phase and the micro morphology was studied. The sample was characterized by X- ray diffraction (XRD), scanning electron microscopy (SEM) and self-assembly equipment. The research results show that TiO2-Cu2O can also promote sintering compactness,and the support with the porosity 33.42%, pure water flux 7927.87 L/m2·h·MPa, bending strength 81.47 MPa and acid /alkali corrosion weight loss of the support 0.97%/1.22% was prepared well，when the highest sintering temperature was 1200℃ and the optimum addition of Cu2O was 0.7% (wt%).
 

Funds：

AuthorIntro：

Reference：

[1] Pabby A K， Rizvi S S H，Sastre A M.Handbook of Membrane Separations：Chemical， Pharmaceutical，Food，and Biotechnological Applications [M]. New York：CRC Press，2008。
[2] Strathrnann H. Inorganic membranes synthesis [J]. Chemical Engineering and Processing，1993，32（3）：417~424。
[3] 王峰，谢志鹏，千粉玲等.多孔陶瓷膜支撑体的制备研究进展[J].硅酸盐通报，2012，31（2）：285~290。
[4] Biesheuvel P M, Verweij H. Design of ceramic membrane supports：permeability，tensile strength and stress［J］.Journal of Membrane Science，1999，156（1）：141~152。
[5] Bhave R R.Inorganic membranes synthesis，Characteristics and Applications．New York：Van Nostr and Reinhold，1991。
[6] 曾美云，王树森，王志忠.分子筛炭复合膜陶瓷支撑体的研究.北京工业大学学报，1995，21（3）：81~88。
[7] 王婕，同帜，韩丹丹，等. 高岭土对陶瓷膜性能影响的研究[J].探索带，2014，2（448）：240。
[8] 刘于昌，黄晓魏.液相烧结氧化铝陶瓷及其烧结动力学分析[J].硅酸盐学报，2006，34 （6）： 64~651。
[9] 漆红，刑卫红，范益群.低温烧成高纯Al2O3多孔陶瓷膜支撑体的制备[J].硅酸盐学报，2010，38（2）：283~293。
[10] 漆虹，刑卫红，范益群.保温时间对低温烧成管式多孔陶瓷膜支撑体性能的影响[J].硅酸盐学报，2011，3：507~511。
[11] 同帜，王婕，崔双科，等. CuO烧结助剂对陶瓷管支撑体性能的影响[J].膜科学与技术，2014，4（4）:68。

Service：
【Download】【Collect】

《膜科学与技术》编辑部 Address: Bluestar building, 19 east beisanhuan road, chaoyang district, Beijing; 100029 Postal code; Telephone：010-80492417/010-80485372; Fax：010-80485372 ; Email：mkxyjs@163.com

京公网安备11011302000819号