采用疏水性聚丙烯中空纤维膜制成膜接触器,以海水循环冷却系统排放的浓海水和与其pH值相同的原海水分别作为吸收液,考察吸收液流量、烟气流量、烟气浓度、气液相压力差等因素对脱硫率的影响.结果表明:与原海水作吸收剂相比,浓海水吸收SO2缓冲能力更大,脱硫效率更高.在操作方式相同,吸收液流量10L•h-1,烟气流量1000 L•h-1,浓海水的脱硫率是原海水的2倍.在高盐度、高碱度、高浊度的浓海水介质条件下,膜接触器性能稳定,具备潜在工业化应用前景.

 Removal of SO2 from simulated flue gas was studied in a hydrophobic polypropylene hollow fiber contactor, using concentrated seawater and seawater as absorbents. The effects of various factors such as flux of absorbents, flux and concentration of gas mixtures, pressure drop between gas and liquid on desulfurizing efficiency were investigated. The results showed that concentrated seawater has a large capacity and high efficiency rate of desulphurization compared to seawater. The  desulfurizing efficiency with concentrated seawater was twice as seawater at the same condition( absorbents flux 10L•h-1 ,gas flux  1000 L•h-1). Membrane contactor can maintain the repeated operation steadily with high salinity, alkalinity and high turbidity concentrated seawater, and have some industrialized application prospect.

[1] 熊丹柳,邓修,等.含浸液膜烟气脱硫试验[J]. 高等化学工程学报,1998,12(1):133-38.
[2] 金美芳,曹义鸣,刑丹敏,等.膜吸收法脱除二氧化硫[J].膜科学与技术,1999,19(3):44-47.
[3] Iverson S B , Bhatia V K, Dam-Johansen K， et al. Characterization of microporous membranes for use in membrane contactors[J], Journal of Membrane Science, 1997, 130(1-2):205-
    217.
[4] Klaassen R. Achieving flue gas desulphurization with membrane gas absorption[J], Filtration＆Separation,2003,40(10):26-28.
[5] 孙雪雁,杨凤林.膜吸收法海水脱硫研究[J],膜科学与技术,2008,28(1):66-71.
[6] 阮国岭,冯厚军.国内外海水淡化技术进展[J],中国给水排水,2008,24(20):86-91.
[7] 侯纯扬.海水冷却技术[J],海洋技术,2002,21(4):33-40.
[8] 郭鲁钢,王海增,等.海水脱硫技术现状[J],海洋技术,2006,25(3):10-15.
[9] 谭天恩,麦本熙,等.化工原理[M].第二版.北京化学工业出版社:1996.6.
[10] 郭占虎,史季芬,徐静年,等.中空纤维膜组件分离酸性气体[J],化工冶金,2000,21(3):268-273
[11] 张慧峰,张卫东,张泽廷,等.中空纤维膜吸收法脱除SO2的试验研究[J],环境科学与技术,2003,26(5):8-10.
[12] 高坚,任中旗,等.孔隙率对膜吸收过程影响试验研究[J],高校化学工程学报,2007,(1):14-22.