以PMDA-ODA型聚酰胺酸为原料，通过掺杂钛硅分子筛（TS-1）制备气体分离用杂化功能炭膜。系统考察了钛硅分子筛（TS-1）掺杂量、炭化温度等因素对功能炭膜气体渗透性和分离性能的影响，利用FT-IR、XRD、TG和TEM等分析手段对TS-1/C杂化原膜及其在不同温度下炭化的炭膜结构和性能进行表征。结果表明：掺杂钛硅分子筛（TS-1）可大幅提高炭膜对CO2的渗透性能；当掺杂浓度为20wt.%，炭化温度为600℃时，CO2、H2、O2、N2、CH4的渗透系数分别可达9087 Barrer、8111 Barrer、2017 Barrer、426 Barrer和357 Barrer；当炭化温度为700℃以上时，功能炭膜对各气体的渗透性急剧降低，气体分离性大幅提高。

A novel composite functional carbon membrane for gas separation is designed and prepared by incorporating TS-1 nanoparticles into the thermosetting resins PMDA-ODA. The effects of the content of the TS-1 and pyrolysis temperatures on the permeability and selectivity performance of the functional carbon membranes are studied. The synthesized membranes are also characterized with TG, FT-IR, TEM and XRD. Results show that the addition of the TS-1 nanoparticles influences the performance of the membranes a lot, especially to the absorbable gas CO2 whose permeability was increased most. The permeabilities of membranes doping with 20.wt% TS-1 and carbonized at 600℃ for pure gas CO2、H2、O2、N2、CH4 are 9087、8111、2017、426 and 357 Barrer(1 Barrer=10-10 cm3(STP)?cm?cm-2?s-1?cmHg-1 ) , respectively. When the membranes are carbonized in temperature above 700℃, the permeabilities of the membranes for all the gases exhibited a drastic drop, while the selectivities are much improved.

[1] Keisha M. Steel 1, William J. Koros, An investigation of the effects of pyrolysis parameters on gas separation properties of carbon materials. Carbon, 2005, 43: 1843–1856
[2] Shiflett MB, Foley HC. Reproducible production of nanoporous carbon membranes Carbon, 2001; 39:1421–46.
[3] Y.Xiao, T.S. Chung, M. L. Chung and A. Yamaguchi, Effects of brominating Matrimid polyimide on the physical and gas transport properties of derived carbon membranesJ. Physical Chemistry B, 2005, 109(40):18741-18748
[4] Youn Kook Kim, Ho Bum Park, Young Moo Lee. Gas separation properties of carbon molecular sieve membranes derived from polyimide/polyvinylpyrrolidone blends: effect of the molecular weight of polyvinylpyrrolidone. Journal of Membrane   Science, 2005, 251: 159–167
[5] M.B. Rao and S. Sircar, Nanoporous carbon membranes for separation of gas mixtures by selective surface flow. Journal of Membrane Science, 1993, 85:253-264
[6] M. Anand, M. Langsam, M.B. Rao, S. Sircar, Multicomponent gas separation by selective surface flow (SSF) and poly-trimethylsilylpropyne (PTMSP) membranes. Journal of Membrane Science, 1997,123:17-25
[7] S. Sircar, M. B. Rao and C.M.A. Thaeron, Selective surface flow membrane for gas separation. Sep Sci Technol, 1999, 34: 2081–2092
[8] T.A. Centeno, A.B.Fuertes, Influence of separation temperature on the performance of adsorption-selective carbon membranes. Carbon, 2002, 41: 2016– 2019
[9] 赵根祥, 贾世军, 钱树安. PI膜转变为炭膜过程中的结构变化[J]. 炭素技术, 1997, 5; 12-17.
[10] Ermannor, Johnb, Perironald J, et al. Spectroscopic characterization of silicalite2I and titanium silicalite2I[J]. J Catal, 1995, 157 (2) :482–500.
[11] B. Zhang, T. Wang, S. Zhang, J. Qiu, X. Jian. Preparation and characterization of carbon membranes made from poly (phthalazinone ether sulfone ketone). Carbon, 2006,44(13): 2764-2769.
[12] Konno H, Nakahashi T, Inagaki M. State analysis of nitrogen in carbon film derived from polyimide Kapton. Carbon, 1997, 35(5): 669-674.
[13] Hatori H, Yamada Y, Shiraishi M, Yoshihara M, Kimura T. The mechanism of polyimide pyrolysis in the early stage. Carbon, 1996, 34(2): 201-208.
[14] 李传峰，钟顺和.聚酰亚胺—二氧化硅杂化膜的制备与表征. 催化学报,2001,22(5):449-452.
[15] MullerU, SteekW. Ammonium-based Alkaline-free Synthesis of MFI-tyPe Boronand Titanium Zeolites. Stud. Surf. Sci. Cacal, 1994, 84: 203-210.