主要研究了采用界面聚合制备复合纳滤膜的过程中，水相添加铵盐表面活性剂对纳滤膜理化性质、膜通量和截留率的影响，以及其在制备过程中的作用机理。樟脑磺酸-三乙胺（CSA-TEA）、四乙基氯化铵（TEAC）、 四丁基溴化铵（TBAB）、苄基三甲基氯化铵（BTMAC）、苄基三乙基氯化铵（BTEAC）等五种常见的铵盐表面活性剂作为添加剂分别添加到水相中，通过场发射扫描电镜（SEM）、原子力扫描电镜（AFM）和红外光谱仪（ATR-FTIR）等手段分析了复合膜表面的形态和理化特性，采用错流过滤的方法测定了膜的过滤性能。结果表明：铵盐添加到水相后对复合纳滤膜表面形态影响明显，胺离子取代基尺寸越大，其表面粗糙度也越大，厚度也随之增加，膜的过滤和截留性能也有明显的改善，而且这些铵盐并没有存在于复合层中，其起到的是催化作用，并没有因参与界面聚合反应而被结合至活性选择层中，对500ppm的氯化钠溶液的截留率从27.7%提高到46%，而通量变化不大。

This paper mainly studies the effect of ammonium salt added in aqueous solution on thin film composite nanofiltration membrane performance. A range of ammonium salt surfactants, such as Camphorsulfonic acid-Triethylamine (CSA-TEA), Tetraethylammonium chloride (TEAC), Tetrabutylammonium bromide (TBAB), 1-Butyl-3-methylimidazolium chloride (BMMIC), Benzyltrimethylammonium chloride (BTMAC), Benzyltriethylammonium chloride (BTEAC), and Dodecyltrimethylammonium chloride (DTMAC), were added into Piperazine (PIP) solution respectively, reacted with trimesoyl chloride (TMC) in the interface between water phase and organic phase. Scanning electronic microscopy (SEM), attenuated total reflection fourier transform infrared spectroscopy (ATR-FTIR), and atomic force microscopy (AFM) were adapted to characterize the membranes physic-chemical properties. The flux and NaCl, MgSO4 rejection were also evaluated. The results show that such ammonium salts didn’t exist in the TFC layer, and as the size of ammonium group increased, the performance of nanofiltration membrane improved. The rejection of NaCI changed from 27.7% to 46% without too much variation on flux.

[1] 王晓琳,张澄洪,赵杰. 纳滤膜的分离机理及其在食品和医药行业中的应用. [J]. 膜科学与技术, 2000, 20(1):29-36.
[2] 俞三传,高从阶,张建飞. 复合纳滤膜及其应用. [J]. 膜科学与技术, 1997, 23(3):139-145.
[3] Xiang J., Xie Z., Hoang M., Zhang K. Effect of amine salt surfactants on the performance of thin film composite poly(piperazine-amide) nanofiltration membranes. [J]. Desalination, 2013, 315:156-163.
[4] Petersen R.J.. Composite reverse osmosis and nanofiltration membranes. [J], Journal of membrane science, 83 (1993) 81–150.
[5] Morgan P.W.. Condensation polymers: by interfacial and solution Methods. [M], Angewandte Chemie, 1965:561.
[6] Lau W.J., Ismail A.F., Misdan N., Kassim M.A.. A recent progress in thin film composite membrane: a review. [J], Desalination, 2012, 287: 190–199.
[7] 汤蓓蓓,徐铜文,武培怡.界面聚合法制备复合膜. [J]. 化工进展, 2007, 19(9):1428~1434.
[8] 陈可可.耐氯功能单体及功能复合膜的制备. [D]. 浙江工业大学, 2010. (学位论文)
[9] Kang G.-d. and Cao Y.-m.. Development of antifouling reverse osmosis membranes for water treatment: A review. [J], Water Research, 2012, 46(3):584-600.
[10] Ghosh Asim K.,Jeong Byeong-Heon,Huang Xiaofei,Hoek Eric M. V.. Impacts of reaction and curing conditions on polyamide composite reverse osmosis membrane properties. [J]. Journal of Membrane Science, 2008, 311(1–2):34-45.
[11] Zou Hao,Jin Yan,Yang Jun,Dai Hongjun,Yu Xiaolan,Xu JianZou. Synthesis and characterization of thin film composite reverse osmosis membranes via novel interfacial polymerization approach. [J]. Separation and Purification Technology, 2010, 72(3): 256-262.
[12] 杨静,曾宪琴,王丽红,李德玲,王伟.界面聚合法制备聚哌嗪酰胺复合纳滤膜. [J]. 化学研究与应用, 2010, 22(4):457-460.
[13] 方鹏,曹兵,淡宜,潘凯.界面聚合法制备聚酰胺纳滤膜及工艺条件对纳滤膜性能的影响. [J]. 高分子材料科学与工程, 2011, 27(10): 1-3.
[14] 顾红霞.界面聚合制备聚酰胺复合纳滤膜. [D]. 北京化工大学, 2012.(学位论文)
[15] 胡增,陈峰,单永广,杨文婷,张芦斌,金涛.聚哌嗪酰胺复合纳滤膜的制备及表征. [J]. 水处理技术, 2013, 39(3):19~22.
[16] Naik S.D., Doraiswamy L.K.. Phase transfer catalysis: chemistry and engineering. [J]. AIChE Journal, 1998, 44(3): 612-646.
[17] Tang C.Y., Kwon Y.-N., Leckie J.O., Effect of membrane chemistry and coating layer on physiochemical properties of thin film composite polyamide RO and NF membranes: II. Membrane physiochemical properties and their dependence on polyamide and coating layers. [J]. Desalination, 2009, 242:168-182.
[18] Tang C.Y., Kwon Y.-N., Leckie J.O., Effect of membrane chemistry and coating layer on physiochemical properties of thin film composite polyamide RO and NF membranes: I. FTIR and XPS characterization of polyamide and coating layer chemistry. [J]. Desalination, 2009, 242:149-167.