以马来酸酐预接枝修饰纯棉机织物，重点探究了紫外光引发聚合甲基丙烯酸羟乙酯(HEMA)的浓度对其在修饰后棉织物表面聚合膜形貌的影响和膜形貌对织物表面结构和亲水性的影响。研究表明，马来酸酐在DMF/LiCl(5wt%)体系中，反应温度T=90℃、时间t=4h、浓度为1.5mol/L时，在织物表面的接枝率可达到8.87%；红外光谱分析发现，接枝后的棉织物在1728cm-1和1641cm-1处出现了明显的羰基峰和碳碳双键峰。通过场发射扫描电子显微镜和水接触角仪对PHEMA聚合膜在织物表面的形貌结构及亲水性进行了表征。结果表明，PHEMA聚合膜较好地覆盖了纤维之间的孔隙；织物表面的亲水性有所下降，其水接触角最高可达130左右，但大约16s后全部渗进织物内部。

The PHEMA membrane was obtained by the UV-induced polymerization of hydroxyethyl methacrylate (HEMA) on the porous cotton woven fabric surface,which was pre-modifiled by the Maleic anhydride (MAH),and also it focused on exploring the influence of the concentration of hydroxy ethyl methacrylate to the polymer film morphology,and its effected on the fabric pore structure and surface hydrophilicity.The researches have shown that the grafting degree of maleic anhydride could reach 8.87% when the reaction temperature and time were 90C and 4h, the monomer concentration was 1.5mol/L;the Infrared spectrum analysised that it appeared obvious carbonyl peak and carbon double bond in 1728cm-1 and 1641cm-1.Meanwhile,the PHEMA membrane morphology structure and hydrophilicity on the surface of the fabric were characterized by the SEM and CA,and the result was that the porosity of the between fibers were effectively covered by the polymer film,the CA of the cotton surface could reach 130,but warter-drop seeped into the cotton fabric about afer16 seconds.

[1] 刘雍, 马敬安. 防水透湿织物的研究现状及发展趋势[J]. 中原工学院学报, 2004(3)：56-62.
LIU Yong, MA Jingan. The research present situation and development trend of moisture permeable fabric[J]. Journal of zhongyuan institute of technology,2004(3): 56-62.
[2] 陈丽华.不同种类防水透湿织物的性能及发展[J].纺织学报, 2012(7): 152-156.
CHEN Lihua.The performance and development of different kinds of waterproof and moisture permeable fabric[J]. Journal of Textile Research, 2012(7):152-156.
[3] 陈益人, 陈小燕, 郑鹏.几种国内外防水透湿织物的性能比较[J].棉纺织技术, 2006(2): 17－19.
CHEN Yiren, CHEN Xiaoyan, ZHENG Peng. Performance comparison of several kinds of waterproof and moisture permeable fabrics both at home and abroad[J].Cotton Textile Technology, 2006(2): 17－19.
[4] 杨银英, 孟家光.防水透湿织物的加工技术及发展趋势[J].现代纺织技术, 2010(1): 58－60.
YANG Yinying, MENG Jiaguang. The processing technology and development trend of waterproof and moisture permeable fabric[J]. Advanced Textile Technology, 2010(1): 58－60．
[5] 谢富春, 张玉清, 朱长春. 防水透气聚氨酯薄膜及涂层的应用和研究[J].化学推进剂与高分子材料, 2004(6): 8-11.
XIE Fuchun, ZHANG Yuqing, ZHU Changchun. Waterproof and breathable polyurethane film and coating application and research[J].Chemical propellant with high polymer material, 2004(6): 8-11.
[6] 殷英贤, 王懽.高分子膜在防护服防水透湿方面的应用[R].中国个体防护装备, 2003(1): 27-28.
    YIN Yingxian, WANG Guan. Polymer membrane application in protective clothing Waterproof moisture permeable[R].China Personal Equipment, 2003(1): 27-28.
[7] 郝新敏, 张建春, 周国泰, 等.聚四氟乙烯复合膜多功能“非典”防护服研究[R].中国个体防护装备，2003(3): 11-14.
    HAO Xinmin, ZHANG Jianchun, ZHOU Guotai, et al. PTFE composite membrane multifunctional protective clothing research "SARS"[R].China Personal Equipment, 2003(3): 11-14.
[8] 何格.新型防水透湿PTFE层压织物的性能研究[J].现代商贸工业, 2007(9): 291-292.
    HE Ge. New type of waterproof and moisture permeable performance of PTFE laminated fabric research[J].Modern Business Trade Industry, 2007(9): 291-292.
[9] 姚穆.纺织材料学[M].中国纺织出版社, 2009: 54-56.
     YAO Mu. Science of Textile Material[M].China Textile Press，2009：54-56.
[10]兰云军, 杨锦宗, 李临生. 马来酸酐与乙醇胺的酰化反应的研究[J].中国皮革, 1999(15): 7-10.
    LAN Yunjun, YANG Jinzong, LI Linsheng. Maleic anhydride and ethanol amine acylation [J].China Leather, 1998(15): 7-10.
[11] Rahman, M.M, A.M.S.Chowdhury, etal.Modification jute yarn with HEMA by thermal curing method [J]. Polymer-Plastics Technology and Engineering, 2007(5): 507-513.
[12] Nho, Y.C.and O.H.Kwon. Blood compatibility of AAc, HEMA, and PEGMA-grafted cellulose film [J]. Radiation Physics and Chemistry, 2003(4): 299-307.
[13] 李梦佳, 沈艺娟, 叶徳辉, 等.聚甲基丙烯酸-2-羟乙酯软骨膜的制备及性能研究[J].海峡药物, 2010(12): 15-18.
LI Mengjia, SHENYijuan, YE Dehui, etal.A study on the preparation and performance of Poly-2-hydroxyethyl methacrylate(PHEMA) hydrogel film[J].The channel drug, 2010(12): 15-18.
[14] 刘芳, 周晓莲, 崔凤萍, 等.聚甲基丙烯酸羟乙酯水凝胶人工晶状体材料的合成与性能[J].生物医学工程学杂质, 2007(3): 595-598.
LIU Fang, ZHOU Xiaolian, CUI Fengping, etal.Synthesis and Properties of Poly(hydroxyethyl methacrylate)Hydrogel for IOL Materials[J].Journal Biomedical Engineering, 2007(3): 595-598.
[15] 陈鹏, 林建华, 李柱来, 等.聚甲基丙烯酸-2-羟乙酯水凝胶载药（类软骨）膜的制备及性能[J].中国组织工程研究与临床康复, 2009(12): 2283-2286.
CHEN Peng, LIN Jianhua, LI Zhulai, et al. Preparation and performance of poly-hydroxyethyl methacrylate drug-carrying hydrogel film[J]. Journal of Clinical Rehabilitative Tissue Engineering Research, 2009(12): 2283-2286.
[16] 朱启龙.二氢月桂烯醇与马来酸酐酯化反应的研究[J].山东化工, 2012(1):8-12.
ZHU Qilong. Dihydrogen myrcene alcohol and maleic anhydride esterification reaction[J].Shandong Chemical Industry, 2012(1): 8-12.
[17] 肖巍.若干表面功能化修饰纤维素材料的制备及其应用[J].浙江大学, 2013(5): 9-15.
XIAO Wei, Several surface functionalization modified cellulose materials preparation and its application[J].Zhejiang University, 2013(5): 9-15.
[18] 张玥, 李海峰, 李欣达, 等.反应挤出原位制备纤维素马来酸酯[J].合成纤维, 2013(6): 6-11.
 ZHANG Yue, LI Haifeng, LI Xinda. In situ preparation of cellulose maleic acid ester reactive extrusion[J]. Synthetic fiber, 2013(6): 6-11.
[19] 陶端健, 周政, 吕学铭, 等.离子液体催化酯化反应的研究进展[J].现代化工, 2011(1): 20-24.
 TAO Duanjian, ZHOU Zheng, LV Xueming, etal.The research progress of ionic liquid catalytic esterification reaction[J].Modern Chemical Engineering, 2011(1):20-24.
[20] KimSH, WonCY, ChuCC.Synthesis and characterization of dextran-maleic acid based hydrogel [J].Journal of Biomedical Materials Research, 1999(2):160-170.
[21] PengXW, RenJL, SunR C. Homogeneous Esterification of Xylan-Rich Hemicelluloses with Maleic Anhydride in Ionic Liquid[J].Biomacromolecules, 2010(12): 3519-3524.
[22] StenstadP, AndresenM,TanemB S,etal.Chemical surface modifications of microfibrillated cellulose[J].Cellulose, 2008 (1): 35-45.
[23] FreudenbergU, ZschocheS, Simon F, et al. Covalent immobilization of cellulose layers onto maleic anhydride copolymer thin films[J]. Biomacromolecules, 2005(3): 1628-1634.