| 氟化PDMS/PVDF双疏膜的制备及其在膜蒸馏中的应用 |
| 作者: 1. 天津大学化工学院,天津 300350;2. 天津化学化工协同创新中心,天津 300072;3. 化学工程联合国家重点实验室(天津大学),天津 300072; |
| 单位: 1. 天津大学化工学院,天津 300350;2. 天津化学化工协同创新中心,天津 300072;3. 化学工程联合国家重点实验室(天津大学),天津 300072; |
| 关键词: 聚二甲基硅氧烷;氟硅烷;超疏水疏油;膜蒸馏;膜污染 |
| DOI号: |
| 分类号: TQ028.8 |
| 出版年,卷(期):页码: 2021, 41(1):102-111 |
|
摘要: |
|
膜蒸馏(MD)是一种能够利用低品位能源的新型脱盐技术,但迄今为止仍然没达到规模化应用的阶段,其主要原因是缺乏具有抗污染性的膜材料。通过表面改性提高膜的超疏水性是解决膜污染问题的有效方法。采用浸涂法,以聚二甲基硅氧烷(PDMS)、正硅酸乙酯(TEOS)和二月桂酸二丁基锡(DBTDL)等为原料活化PVDF膜表面,然后接枝1H,1H,2H,2H-全氟癸基三乙氧基硅烷(AC-FAS)制备双疏膜。其水、油接触角分别达161.3°和134.9°,并且具有良好的热稳定性和化学稳定性。在直接接触式膜蒸馏(DCMD)实验中,具有较高的膜通量、良好的脱盐性能以及优异的抗综合膜污染的能力。 |
|
Membrane distillation (MD), as a new desalting technology, can utilize low grade energy. However, large-scale application based on membrane distillation has not been widely used. One of the important reasons is the lack of membrane with good anti-fouling property. Therefore, it is of critical importance to prepare amphiphobic membrane to improve the anti-fouling property. A functional layer was formed on the PVDF membrane surface by using polydimethylsiloxane (PDMS), tetraethoxysilane (TEOS) and dibutyltin dilaurate (DBTDL). Next, the surface was fluorinated with 1H,1H,2H,2H-perfluorodecyltriethoxysilane to obtain amphiphobic membrane. The contact angles of water and oil reached 161.3° and 134.9° respectively, showing obvious superhydrophobic and oleophobic properties. In addition, the amphiphobic membrane still shares good stability under harsh conditions. The long-term direct contact membrane distillation (DCMD) experiment shows outstanding comprehensive anti-fouling capacity with higher flux and excellent salt rejection. |
|
基金项目: |
| 国家自然科学基金项目( 21878218 ) |
|
作者简介: |
|
Membrane distillation (MD), as a new desalting technology, can utilize low grade energy. However, large-scale application based on membrane distillation has not been widely used. One of the important reasons is the lack of membrane with good anti-fouling property. Therefore, it is of critical importance to prepare amphiphobic membrane to improve the anti-fouling property. A functional layer was formed on the PVDF membrane surface by using polydimethylsiloxane (PDMS), tetraethoxysilane (TEOS) and dibutyltin dilaurate (DBTDL). Next, the surface was fluorinated with 1H,1H,2H,2H-perfluorodecyltriethoxysilane to obtain amphiphobic membrane. The contact angles of water and oil reached 161.3° and 134.9° respectively, showing obvious superhydrophobic and oleophobic properties. In addition, the amphiphobic membrane still shares good stability under harsh conditions. The long-term direct contact membrane distillation (DCMD) experiment shows outstanding comprehensive anti-fouling capacity with higher flux and excellent salt rejection. |
|
参考文献: |
|
[1]Yong J, Chen F, Yang Q, et al. Superoleophobic surfaces[J]. Chem Soc Rev, 2017, 46(14): 4168-4217. |
|
服务与反馈: |
| 【Download】【加入收藏】 |
《膜科学与技术》编辑部 地址:北京市朝阳区北三环东路19号蓝星大厦 邮政编码:100029 电话:010-80492417/010-80485372 传真:010-80485372邮箱:mkxyjs@163.com
京公网安备11011302000819号